Precision Inclineable Rotary Table

产品描述

This series tilting rotary tables are one of main accessories for milling, boring an drilling machines. The can be used for maching, the oblique hole or surface and hole of compound angle at one set-up. Besides this, it is so designed as to be used in a vertical position to carry out center work with a tailstock.
This table can be tilted to any position from 0 degree to 90 degree and locked.
A flange for connecting scroll chuck is special supplied, and be packed independent. For special order, the dividing plates accessory allows the operator to accurately divide the 360 degree rotation of the clamping surface in to divisions of 2 through 66, and all divisible of 2, 3 and 5 from 67-132.

Specification	Model No.	Model No.	Model No.	Model No.
Specification	200-1913	200-1915	200-1917	200-1919
Diameter of table	160mm	250mm	320mm	400mm
Morse taper of the center hole	MT2	MT3	MT4
Diameter of the center hole	25x6mm	30x6mm	40x10mm
Width of T-slot	10mm	12mm	14mm
Modules of worm and worm gear	1.5	2	2.5	3.5
Width of the locating key	12mm	14mm	18mm
Adjacent angle of T-slot	90°	60°
Transmission ratio of the worm gear	1:90
Graduation of the table	360°
Tilting angle	0-90°
Readout of the handwheel	1'
Minimum value of vernier	10"
Minimum reading of the tilting vernier	2'
Indexing accuracy	80"	60"
Max. bearing (Hon.)	100kgs	200kgs	250kgs	300kgs
Max. bearing (Ver.)	50kgs	100kgs	125kgs	150kgs
A	255mm	310mm	380mm	500mm
B	172mm	252mm	322mm	400mm
C	168mm	235mm	252mm	306mm
D	160mm	250mm	320mm	400mm
E	11mm	14mm	16mm	16mm
F	138mm	199mm	241mm	295mm
H	100mm	140mm	175mm	217mm
L	160mm	205mm	255mm	320mm
M	MT2	MT3	MT4	MT4
P	40mm	40mm	40mm	50mm
d	25mm	30mm	40mm	40mm